IIS 7 and Above
How to enable https on iis 7
Last post Nov 09, 2010 09:00 AM by Leo Tang - MSFT
Nov 06, 2010 12:10 PM|SHESHONQ|LINK
I just created a certificate on iis 7 and I wanted to bind it to an alreay created site the problem when I click bindings link at the right margin zone and then trying to change the protocol from http to https then I've found that https is disabled, so
how to enable it
This image above could help to figure out the problem
Nov 06, 2010 04:39 PM|Hades666|LINK
Can't see your image. Might want to try tinypic...Anyways, take a read at the learn article here.
How to setup SSL on IIS7
Nov 06, 2010 04:50 PM|SHESHONQ|LINK
I solved the problem but fall in another one, after configuring the site to be use certificate, I can't access to it. I receive a page that tels me
SSL received a record that exceeded the maximum permissible lenght Error code ssl_error_rx_record_too_long and since there I was completely blocked ; (
Nov 06, 2010 05:07 PM|Hades666|LINK
Did you add a port such as 443 when you added the binding?
Nov 06, 2010 07:58 PM|SHESHONQ|LINK
When you click bindings you have a dialog box with three fields
field1 field2 field3
http/https IP address/host name port=443 for ssl
Did you mean that or are there any other steps to achieve? I mean setting the port.
Remarque: I added the port to the exceptions list in the firewall
Nov 09, 2010 09:00 AM|Leo Tang - MSFT|LINK
is the recommended toolset for troubleshooting problems related to Secure Socket Layers (SSL) or certificates. You can run the tool on the local sever to see if there is any error in the output.