IIS 7.0 - Application Request Routing (ARR)

Re: Slow loading of page after Configure the ARR

andy18 — Fri, 10 Jul 2009 16:14:04 GMT

The existing rules that I have on both ARR is default which I have created when I created the Server farm. I have not made any changed on the rules except the load balance distribution.

Re: Slow loading of page after Configure the ARR

andy18 — Fri, 10 Jul 2009 14:46:46 GMT

Hi Anilr,

Thanks for replying. I have the failed request tracing modules before ARR is loaded and have captured that based on your request. Which part in the log should I be looking into.

As an additional note, the site now loads but the CSS of the application does not loads.

Re: Slow loading of page after Configure the ARR

anilr — Fri, 10 Jul 2009 13:49:45 GMT

Collect IIS failed request trace log at the ARR servers - after installing the tracing feature, please repair ARR install so that the ARR tracing area is avilable for your failed request tracing rule.

Slow loading of page after Configure the ARR

andy18 — Fri, 10 Jul 2009 04:26:59 GMT

Hi All,

I have ARR installed within the Windows 2008 Hyper-V as follow:

Server 1:

Hyper-V 1 : ARR, DNS and RRAS ( Assuming public IP 10.10.10.1 and private IP 192.168.0.4 )

Hyper-V 2 : IIS ( application server ) ( private Ip 192.168.0.5 )

Server 2:

Hyper-V 1 : ARR, DNS and RRAS ( Assuming public IP 10.10.11.1 and private IP 192.168.0.6 )

Hyper-V 2 : IIS ( application server ) ( private Ip 192.168.0.7 )

Both the Server 1 / 2 Hyper-V is connected via Virtual Local Connection. I have setup the Hyper-V 1 on both servers with RRAS to route the incoming HTTP request to application servers. I have created 1 server farm on each server which consist 2 of the application server.

If the RRAS is set to route the HTTP request to 192.168.0.5 or 192.168.0.7, direct traffic to the application server, the site loads within seconds but this does not goes through the ARR. If the RRAS is set to route the HTTP traffic to 192.168.0.4 or 192.168.0.6 ( the ARR server ), and I tried to load the website, I can see the browser keeps on spinning but the request are recorded to the Monitoring and Management at the server farm.

Any suggestions?